Konica-minolta bizhub C31P Uživatelský manuál

bizhub C31PReference GuideA0EA-9565-00A

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE

Installing the Printer Driver82Installing the Printer Driver" For the system requirements for the printer driver, refer to the User’s Guide on t

Installing the Printer Driver 835 Select the connection type according to the environment.For a local connection: Click Use an existing port, and then

Installing the Printer Driver847 Select TCP/IP Device in the Device type list and type the IP address for the printer in the Hostname or IP address te

Installing the Printer Driver 858 Choose Have Disk, locate the directory on the CD-ROM where the printer driver files are located, and then choose OK.

Installing the Printer Driver869 Click Next.10 Click Next.

Installing the Printer Driver 8711 Select whether the printer driver is to be shared, and then click Next.

Installing the Printer Driver8812 Click Finish.This completes the installation of the printer driver.

Selecting Print Options/Defaults 89Selecting Print Options/Defaults" You must have administrator privileges in order to install the printer driv

Selecting Print Options/Defaults906 Select the General tab.7 Click Printing Preferences.

Selecting Print Options/Defaults 918 Select the default settings for your printer, such as the default media for-mat you use, on the appropriate tabs.

 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in bin

Uninstalling the Printer Driver92Uninstalling the Printer Driver1Close all applications.2 From the Start menu, click Control Panel, then Printers.3 Ri

Specifying Printer Driver Settings 93Specifying Printer Driver Settings1Click Start, click Control Panel, and then click Printers.2 Right-click the KO

Specifying Printer Driver Settings94Advanced Options Paper SizeSelect the output media size. Copy CountSpecify the number of copies. Manually Print

Specifying Printer Driver Settings 95 Image/Text/Graphics HalftoneSelect halftone for images/text/graphics. Image/Text/Graphics Edge EnhancementSele

Specifying Printer Driver Settings96

Operation onLinux

System Requirements for the Printer Driver98System Requirements for the Printer DriverBefore installing the printer driver, make sure that your system

Installing PPD File From the Command Line 99Installing PPD File From the Command Line" Before proceeding with the installation, be sure to exit

Adding the Printer100Adding the Printer" After copying the PPD file, be sure to restart CUPS.1 Start up the Web browser.2 Enter the URL “http://

Adding the Printer 1016 Select a Device Port from the Device list, then click con-tinue.- TCP/IP: AppSocket/HP Jet-Direct, Internet Printing Pro-tocol

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redist

Adding the Printer10210 Select KONICA MINOLTA bizhub C31P PPD (en), and then click Continue.The following message appears.

Specifying Printer Driver Settings 103Specifying Printer Driver SettingsDisplaying the Settings Page1 Start up the Web browser.2 Enter the URL “http:/

Specifying Printer Driver Settings104Printer Driver SettingsExtraParameters SettingsBrightness Specifies the brightness of the image as -15%, -10%, -5

Specifying Printer Driver Settings 105GeneralSelect Color Specifies the color for printing as Color or Grayscale. The default setting is Color.Staple

Specifying Printer Driver Settings106Graphics OptionsImage OptionsParameters SettingsGraphics Edge Enhance-mentSelect whether graphic edges are empha-

Specifying Printer Driver Settings 107Options InstalledImage RGB Intent Specifies RGB intent for image as Vivid, Photographic, Relative Color, or Abso

Specifying Printer Driver Settings108SimulationText OptionsParameters SettingsCMYK Gray Treatment Specifies simulation gray treatment as Com-posite Bl

Specifying Printer Driver Settings 109BannersParameters SettingsStarting Banner Specifies the starting banner as none, clas-sified, confidential, secr

Printing a Document110Printing a DocumentThe contents and available options that appear in the print dialog box may vary depending on the application

Printing a Document 111Example Using OpenOffice" The procedure for printing on Red Hat 9 with OpenOffice 1.0.2 is described below. The following

ContentsContentsi1 Operation on Mac OS X ... 1System Requirements fo

Printing a Document1124 Click Import.5 Click Browse.Driver Installation dialog box appears.6 In the Path, enter “/usr/share/cups/model”.7 In the Selec

Printing a Document 1138 In the Please select a suit-able driver list, select KON-ICA MINOLTA bizhub C31P OpenOffice PPD, and then click Next.9 Select

Printing a Document11414 Click Print in the File menu.The Print dialog box appears.15 Select the name of the printer specified in the Ope-nOffice prin

Checking Print Jobs 115Checking Print JobsYou can check the status of print jobs from a Web browser.1 Start up the Web browser.2 Enter the URL “http:/

Troubleshooting116TroubleshootingSymptom ActionThe printer stops because of a paper size error or a paper type error.The job may have been sent with a

Operation onNetWare

Printing With NetWare118Printing With NetWareThe printer controller supports the following environments.Network Printing in a NetWare EnvironmentFor R

Printing With NetWare 1197 In Administrator mode of PageScope Web Connection, select NetWare from the Network tab, and then specify the following sett

Printing With NetWare120For Print Server Mode With NetWare 4.x Bindery Emulation" Before using bindery emulation, check that bindery emulation i

Printing With NetWare 121– Frame Type:Select Auto. (Select the frame type according to the network envi-ronment.)– Mode: Select PServer.– Print Server

ContentsiiSpecifying Page Setup Settings 38Page Attributes Options 39Custom Paper Size Options 40Specifying Print Settings (Mac OS X 10.4) 41Print Dia

Printing With NetWare1225 In Administrator mode of PageScope Web Connection, select NetWarefrom the Network tab, and then specify the following settin

Printing With NetWare 123For NetWare 4.x/5.x/6 Print Server Mode (NDS)" To use the Print Server mode, the IPX protocol must be loaded on the Net

Printing With NetWare124– Frame Type:Select Auto. (Select the frame type according to the network envi-ronment.)– Mode: Select PServer.– Print Server

Printing With NetWare 1257 In the Gateway Types, select Novell Printer Gateway, and then register it.8 In the Configure Novell PDS for Printer Agent w

Printing With NetWare126

Printer Utilities

Installing Printer Utilities on Windows128Installing Printer Utilities on Windows" You must have administrator privileges in order to install th

Understandingthe EthernetConfigurationMenus

Ethernet Menu130Ethernet MenuLocation within the Configuration MenuTCP/IPETHERNETENABLEIP ADDRESSSUBNET MASKDEFAULT GATEWAYREADYJOB TIME-OUTDHCPCAMERA

Ethernet Menu 131ENABLEBIDIREC-TIONALTELNETBONJOURDYNAMIC DNSIPPRAW PORTSLPENABLEENABLESMTPSNMPWSD PRINTIPSECIP ADDRESS FILTERIPv6ENABLENETWAREAPPLETA

ContentsiiiSpecifying Printer Driver Settings 93Common buttons 93Layout 93Advanced Options 94Paper/Quality 953 Operation on Linux ...

Ethernet Menu132Accessing the Ethernet MenuUse the following series of keystrokes at the printer to access the Ethernet menu options on your printer.

Ethernet Menu 133z NETWARE - ENABLEz IEEE802.1X - ENABLE

Ethernet Menu134Using the Network Menu OptionsIf the printer is connected to a network, the following settings should be spec-ified. For details about

Ethernet Menu 135DEFAULT GATEWAYDHCPBOOTPARP/PINGPurpose Sets the address of the router/gateway if a router/gateway is used on your network and you al

Ethernet Menu136HTTP – ENABLEFTP – ENABLETELNETBONJOUR – ENABLEPurpose Select whether or not to enable HTTP. If YES is selected, HTTP is enabled. If N

Ethernet Menu 137DYNAMIC DNS – ENABLEIPP – ENABLERAW PORT – ENABLERAW PORT – BIDIRECTIONALPurpose Select whether or not to enable Dynamic DNS.If YES i

Ethernet Menu138SLP – ENABLESMTP – ENABLESNMP – ENABLEWSD PRINT – ENABLEPurpose Select whether or not to enable SLP. If YES is selected, SLP is enable

Ethernet Menu 139IPSEC – ENABLEIP ADDRESS FILTER – ACCESS PERMISSIONIP ADDRESS FILTER – ACCESS REFUSEPurpose Select whether or not to enable IPsec.If

Ethernet Menu140IPv6 – ENABLEIPv6 – AUTO SETTINGIPv6 – LINK LOCALIPv6 – GLOBAL ADDRESSIPv6 – GATEWAY ADDRESSNETWAREENABLEPurpose Select whether or not

Ethernet Menu 141APPLETALKENABLESPEED/DUPLEXIEEE802.1XENABLEPurpose Select whether or not to enable AppleTalk.If YES is selected, AppleTalk is enabled

ContentsivNETWARE 140APPLETALK 141SPEED/DUPLEX 141IEEE802.1X 1417 Network Printing ...

Ethernet Menu142

Network Printing

Network Connection144Network ConnectionTheoryTo connect your printer in a TCP/IP network environment, you must make sure that the internal network add

Network Connection 145Making the ConnectionEthernet InterfaceAn RJ45 connector can be used as the Ethernet interface for this printer.When connecting

Network Connection1463 When the printer’s message window displays READY, print a configura-tion page to verify that the IP address is set.4 Install th

Network Connection 147Setting the Address ManuallyYou may also manually change the printer’s IP address, subnet mask, and gateway by using the followi

Network Connection1483 If you don’t want to set the subnet mask or gateway, go to step 5.If you don’t want to set the subnet mask, but you do want to

Network Connection 1494 If you don’t want to set the gateway, go to step 5.If you want to set the gateway, follow these steps.Use the and keys to

Network Connection1505 Save your configuration changes and make the printer ready for printing again.6 Print a configuration page to verify that the c

Network Printing 151Network PrintingNetwork printing terms are described below. AppleTalk Bonjour BOOTP DDNS DHCP FTP HTTP IEEE802.1x IPP IP

ContentsvDetermining the Printer Name 174Setting Up Your Browser Software 174Internet Explorer (version 6.0 for Windows) 175Netscape Navigator (versio

Network Printing152BOOTPBOOTP (Bootstrap Protocol) is an Internet protocol that enables a diskless workstation to discover (1) its own IP address, (2)

Network Printing 153IEEE802.1xThis protocol for determining the user authentication method within the LAN is compatible with wireless and wired LANs.

Network Printing154SLPTraditionally, in order to locate services on the network, users had to supply the host name or network address of the machine p

Network Printing 155Port 9100When printing through a network, TCP/IP port number 9100 can be used to send raw data.WSD printPrinting is possible using

Network Printing156Printing via IPP (Internet Printing Protocol)Adding an IPP Port using the Printer Driver CD-ROM" For IPP printing, specify th

Network Printing 1577 Select Internet Printing as the printing method from the pull-down list, and then click Next.8 In the Confirm Installation Setti

Network Printing1589 Click Finish. This completes the installation of the printer driver.Adding an IPP Port using Add Printer Wizard - Windows Server

Network Printing 1592 In the URL field in the next dialog box enter the printer’s network path-name in one of the following formats and then choose Ne

Network Printing160Adding an IPP Port using Add Printer Wizard-Windows Vista1 Click Start, click Control Panel, and then click Printers.2 Click Add a

Network Printing 1615 In the URL field in the next dialog box enter the printer’s network path-name in one of the following formats and then choose Ne

ContentsviDone Job List (Detail) 260Print Page 261Local Interface 261Default Settings 262Download Font/Form 291Network Page 295TCP/IP 295Bonjour 315WS

Network Printing162Printing via Web Service Print FunctionIn Windows Vista, printers on the network that support Web Service print can be detected and

Network Printing 1636 Click Locate and install driver software (recommended).7 Click Browse my computer for driver software (advanced).

Network Printing1648 Click Browse, locate the directory on the CD-ROM where the printer driver files are located and then click OK.9 Click Next.10 Cli

Network Printing 1656 In the dialog box, click Add a local printer.7 Click Create a new port, and then select Standard TCP/IP port.8 Click Next.

Network Printing1669 Select Web Services Device and type the IP address for the printer, and then click Next. The Found New Hardware Wizard dialog box

Network Printing 16711 Click Browse my computer for driver software (advanced).12 Click Browse, locate the directory on the CD-ROM where the printer d

Network Printing16815 Click Next.16 Select whether the printer driver is to be shared, and then click Next.

Network Printing 16917 Click Finish. This completes the installation of the printer driver.

Troubleshooting170TroubleshootingSymptom ActionSome client functions are not available with the Point and Print feature when the server is running Win

Using PageScopeWeb Connection

Operation onMac OS X

About PageScope Web Connection172About PageScope Web ConnectionThis chapter provides information on PageScope Web Connection, an HTTP (HyperText Trans

About PageScope Web Connection 173" You cannot access PageScope Web Connection using a local (USB or Parallel) connection.

Setting Up the Printer Web Page174Setting Up the Printer Web PageSetting up the printer web page to run on your network involves two basic steps: Det

Setting Up the Printer Web Page 175Internet Explorer (version 6.0 for Windows)1 Start Internet Explorer.2 From the Tools menu choose Internet Options.

Setting Up the Printer Web Page1767 Enter the printer name or IP address in the URL Location box to access the printer home page.http://192.168.1.2/

Understanding the PageScope Web Connection Window 177Understanding the PageScope Web Connection WindowThe illustration below identifies the navigation

Understanding the PageScope Web Connection Window178Current StatusThe current status of the printer is displayed at the top of all PageScope Web Conne

Logging on to PageScope Web Connection 179Logging on to PageScope Web ConnectionLogin PageUser authentication, account track and language settings can

Logging on to PageScope Web Connection180Language SettingIf necessary, the display language used for Web Connection can be changed.Public User ModeIn

Logging on to PageScope Web Connection 1813 If Account Track (in the Network - Authentication - User Authentica-tion page) is set to On, continue with

Copyright NoticeThe digitally encoded software and publication included with your printer are Copyrighted © 2008 by KONICA MINOLTA BUSINESS TECHNOLOGI

System Requirements for the Printer Driver2System Requirements for the Printer DriverBefore installing the printer driver, make sure that your system

Logging on to PageScope Web Connection182Administrator ModeIn order to change any configuration settings through PageScope Web Con-nection, you must f

Viewing Printer Status 183Viewing Printer StatusSystem PageOn this page you find printer status and current configuration settings, printer identifica

Viewing Printer Status184Device InformationSummary (shown previous)The System - Device Information - Summary window provides the follow-ing informatio

Viewing Printer Status 185Paper SourceThe System - Device Information - Paper Source window provides the fol-lowing information.Finisher Identifies wh

Viewing Printer Status186Paper Source (Detail)The System - Device Information - Paper Source - Detail window provides the following information.Item D

Viewing Printer Status 187Output TrayThe System - Device Information - Output Tray window provides the fol-lowing information.Item DescriptionTray Dis

Viewing Printer Status188StorageThe System - Device Information - Storage window provides the following information.Item DescriptionTotal Displays the

Viewing Printer Status 189Interface InformationThe System - Device Information - Interface Information window provides the following information.Item

Viewing Printer Status190Dynamic DNS If Enable is displayed, Dynamic DNS is enabled.If Disable is selected, Dynamic DNS is dis-abled.IPP If Enable is

Viewing Printer Status 191IPv6 Global AddressIdentifies the IPv6 global address of the Ethernet interface.MAC Address Identifies the Media Access Cont

Installing the Printer Driver 3Installing the Printer Driver" You must have administrator privileges in order to install the printer driver.&qu

Viewing Printer Status192ConsumablesThe System - Device Information - Consumables window provides the fol-lowing information.Item DescriptionConsumabl

Viewing Printer Status 193CounterThe System - Counter window provides the following information.Item DescriptionPages Printed Indicates the number of

Viewing Printer Status194Online AssistanceThe System - Online Assistance window provides the following information.Item DescriptionContact Displays th

Viewing Printer Status 195User Authentication" This page appears only when logged on to Registered User Mode.User Password changeThe password fo

Viewing Printer Status196Registration InformationThe registration information for the user who is logged on can be checked from the System - User Auth

Viewing Printer Status 197Job PageThis page allows you to view the status of current print jobs.Active Job ListThe Job - Active Job List window provid

Viewing Printer Status198Done Job ListThe Job - Done Job List window provides the following information for up to 50 print jobs:Item DescriptionJob Nu

Viewing Printer Status 199Done Job List (Detail)The Job - Done Job List - Detail window provides the following information for the selected job:Item D

Viewing Printer Status200Print PageThis page allows you to check the settings for printing when there is no PDL printer driver.Default SettingsGeneral

Viewing Printer Status 201Output Tray Displays the name of the output trays (Main Tray, Sub Tray)." Sub Tray appears only if the optional staple

Installing the Printer Driver44 Click Continue.5 Click Continue.

Viewing Printer Status202Paper Source SettingsThe Print - Default Settings - Paper Source Settings window provides the following information.Item Desc

Viewing Printer Status 203Tray3This item appears only if the optional lower feeder unit is installed.Paper Size Indicates the setting for the size of

Viewing Printer Status204Tray Mapping SettingsThe Print - Default Settings - Tray Mapping Settings window provides the following information.Item Desc

Viewing Printer Status 205Finisher Settings" This page appears only if the optional staple finisher is installed.The Print - Default Settings -

Viewing Printer Status206PCL SettingsThe Print - Default Settings - PCL Settings window provides the following information.Item DescriptionFont Number

Viewing Printer Status 207PS SettingsThe Print - Default Settings - PS Settings window provides the following information.Item DescriptionWait Timeout

Viewing Printer Status208XPS SettingsThe Print - Default Settings - XPS Settings window provides the following information." This page appears o

Viewing Printer Status 209Print Quality SettingsThe Print - Default Settings - Print Quality Settings window provides the following information.Item D

Viewing Printer Status210Halftone (Image/Text/Graphics Printing)Indicates how halftones are reproduced.If Line Art is indicated, halftones are reprodu

Viewing Printer Status 211PS Settings Image/Text/Graphics Printing (RGB Source)Identifies the color space for RGB data.Image/Text/Graphics Printing (R

Installing the Printer Driver 56 Check the details of the license agreement, and then click Continue.7 Click Agree in the confirmation dialog box if y

Viewing Printer Status212Camera Direct SettingsThe Print - Default Settings - Camera Direct Settings window provides the following information.Item De

Viewing Printer Status 213Economy Print ModeShows the setting for whether or not Economy Print Mode is enabled. When Economy Print Mode is enabled, th

Viewing Printer Status214Font/FormPCL FontThe Print - Font/Form - PCL Font page allows you to check the list of PCL fonts that the printer manages.Ite

Viewing Printer Status 215PS FontThe Print - Font/Form - PS Font page allows you to check the list of Post-Script fonts that the printer manages.Item

Viewing Printer Status216Form OverlayThe Print - Font/Form - Form Overlay page allows you to check the list of form overlays that the printer manages.

Viewing Printer Status 217Color ProfileThe Print - Font/Form - Color Profile page allows you to check the list of color profiles that the printer mana

Viewing Printer Status218Report TypesThe Print - Report Types window provides the following information.Item DescriptionConfiguration Page Prints the

Viewing Printer Status 219Direct Print" This page appears only if a hard disk kit or a CompactFlash card is installed.The Print - Direct Print p

Configuring the Printer220Configuring the PrinterIn order to make any configuration changes through PageScope Web Con-nection, you must first enter Ad

Configuring the Printer 221Device InformationSummary (shown previous)The System - Device Information - Summary window provides the follow-ing informat

Installing the Printer Driver68 In the Select a Destination page, select the disk in which you wish to install the software, and then click Continue.9

Configuring the Printer222Paper SourceThe System - Device Information - Paper Source window provides the fol-lowing information.Finisher Identifies wh

Configuring the Printer 223Paper Source (Detail)The System - Device Information - Paper Source - Detail window provides the following information.Item

Configuring the Printer224Output TrayThe System - Device Information - Output Tray window provides the fol-lowing information.Item DescriptionTray Dis

Configuring the Printer 225StorageThe System - Device Information - Storage window provides the following information.Item DescriptionTotal Displays t

Configuring the Printer226Interface InformationThe System - Device Information - Interface Information window provides the following information.Item

Configuring the Printer 227Dynamic DNS If Enable is displayed, Dynamic DNS is enabled.If Disable is selected, Dynamic DNS is dis-abled.IPP If Enable i

Configuring the Printer228IPv6 Global AddressIdentifies the IPv6 global address of the Ethernet interface.MAC Address Identifies the Media Access Cont

Configuring the Printer 229ConsumablesThe System - Device Information - Consumables window provides the fol-lowing information.Item DescriptionConsuma

Configuring the Printer230CounterThe System - Counter window provides the following information.Item DescriptionPages Printed Indicates the number of

Configuring the Printer 231Online AssistanceThe System - Online Assistance window allows you to configure the follow-ing items.Item DescriptionContact

Installing the Printer Driver 710 Enter the administrator user name and password in the Authenticate dia-log box, and then click OK.11 After the insta

Configuring the Printer232Supplies and Accesso-riesSets the web address where you can purchase printer supplies and accessories.Range: Up to 127 chara

Configuring the Printer 233Import/Export" This page appears only if a hard disk kit or a CompactFlash card is installed.Job LogThe System - Impo

Configuring the Printer234User InformationThe System - Import/Export - User Information window allows you to con-figure the following items." Th

Configuring the Printer 235Authentication" This page appears only if a hard disk kit or a CompactFlash card is installed.Default Permission Sett

Configuring the Printer236User RegistrationThis page appears only if User Authentication is set to On (in the Network - Authentication - User Authenti

Configuring the Printer 237User Registration (New Registration)The System - Authentication - User Registration - New Registration win-dow allows you t

Configuring the Printer238Account NameSpecify the account that the user belongs to.Range: Up to 8 charactersDefault: [Blank]" Create the account

Configuring the Printer 239Account Track Registration" This page appears only if Account Track is set to On (in the Network - Authentication - U

Configuring the Printer240Account Track Registration (New Registration)The System - Authentication - Account Track Registration - New Regis-tration wi

Configuring the Printer 241Function PermissionPrint Select whether or not the new account is permitted to print.Choices: Allow, RestrictDefault: Allow

Printer Setup Utility Settings8Printer Setup Utility Settings" This function is not supported by Mac OS X 10.5.When Using a USB Connection1 Use

Configuring the Printer242Date/TimeManual SettingsThe System - Date/Time - Manual Settings window allows you to configure the following items:Item Des

Configuring the Printer 243Minute Specifies the minute for the printer’s internal clock.Configuration Menu Equivalent:SYS DEFAULT MENU - CLOCK - TIMET

Configuring the Printer244Time Adjustment SettingsThe System - Date/Time - Time Adjustment Settings window allows you to configure the following items

Configuring the Printer 245Adjustment Time Shows the last modification date and time.Default: UnknownApply button Applies the configuration settings f

Configuring the Printer246Admin PasswordThe System - Admin Password window allows you to configure the follow-ing items:Item DescriptionCurrent Passwo

Configuring the Printer 247" If you forget the new password you’ve assigned, use the printer’s SYS DEFAULT MENU - RESTORE DEFAULTS - RESTORE PRI

Configuring the Printer248Machine SettingsThe System - Machine Settings window allows you to configure the follow-ing items:Item DescriptionAdministra

Configuring the Printer 249Do Startup Page Selects whether or not a startup page is printed when the printer is turned on.Choices: On, OffDefault: Off

Configuring the Printer250Energy Saver Time Specifies the length of time until the machine enters Energy Saver mode.This menu item appears only when E

Configuring the Printer 251ROM VersionThe System - ROM Version window provides the following information.Item DescriptionEngine ROM Version Displays t

Printer Setup Utility Settings 94 Select bizhub C31P in the Printer Name list." If bizhub C31P does not appear, check that the printer is turned

Configuring the Printer252MaintenanceClear SettingsThe System - Maintenance - Clear Settings page allows you to reset the printer settings to its fact

Configuring the Printer 253Reset PrinterThe System - Maintenance - Reset Printer page allows you to reset the printer controller.Clear button When cli

Configuring the Printer254Status Notification Settings

Configuring the Printer 255The System - Status Notification Settings window allows you to configure the following items:Item DescriptionIP Address Not

Configuring the Printer256Alert Paper Empty Specifies whether or not a notification is sent when the paper tray runs out of paper.Choices: Enable, Dis

Configuring the Printer 257Service Call Selects whether or not notification is sent to the service representative when a con-dition occurs that requir

Configuring the Printer258Job PageThis page allows you to view the status of current print jobs.Active Job ListThe Job - Active Job List window provid

Configuring the Printer 259Done Job ListThe Job - Done Job List window provides the following information for up to 50 print jobs.Item DescriptionJob

Configuring the Printer260Done Job List (Detail)The Job - Done Job List - Detail window provides the following information for the selected job.Item D

Configuring the Printer 261Print PageThis page allows more detailed printer settings to be specified.Local InterfaceThe Print - Local Interface window

Printer Setup Utility Settings10When Using a Network ConnectionThe network connection settings can be specified in one of three ways: Bonjour Setting,

Configuring the Printer262Default SettingsGeneral SettingsThe Print - Default Settings - General Settings window allows you to con-figure the followin

Configuring the Printer 263Duplex If Long-Edge Binding is selected, the pages will be printed on both sides of the paper for long-edge binding.If Shor

Configuring the Printer264Paper Size Specifies the default setting for the size of paper.Choices: Letter, Legal, Executive, A4, A5, A6, B5 (JIS), B6,

Configuring the Printer 265Paper Type Specifies the default setting for the type of paper.Choices: Plain Paper, Recycled, Thick 1, Thick 2, Label, Tra

Configuring the Printer266Paper Source Settings

Configuring the Printer 267The Print - Default Settings - Paper Source Settings window allows you to configure the following items:Item DescriptionTra

Configuring the Printer268Width Specifies the paper width when Paper Size is set to Custom Size.Range: 3.63 - 8.50 (inch) / 92 - 216 (mm)Configuration

Configuring the Printer 269Paper Type Specifies the setting for the type of paper loaded into Tray 2.Choices: Any, Plain Paper, RecycledDefault: Plain

Configuring the Printer270Tray Chaining Tray Chaining If Enable is selected and the specified paper tray runs out of paper during print-ing, a paper t

Configuring the Printer 271Tray Mapping SettingsThe Print - Default Settings - Tray Mapping Settings window provides the following information.Item De

Printer Setup Utility Settings 114 Select KONICA MINOLTA bizhub C31P(xx:xx:xx) in the Printer Name list." “xx:xx:xx” refers to the last six digi

Configuring the Printer272Logical Tray 0-9 Select the tray that is used for printing when a print job is received from another manufacturer’s printer

Configuring the Printer 273Finisher Settings" This page appears only if the optional staple finisher is installed.The Print - Default Settings -

Configuring the Printer274PCL SettingsThe Print - Default Settings - PCL Settings window allows you to configure the following items:Job Separating Th

Configuring the Printer 275Symbol Set Selects the symbol set used with the PCL language.Default: PC-8Configuration Menu Equivalent: SYS DEFAULT MENU -

Configuring the Printer276PS SettingsThe Print - Default Settings - PS Settings window allows you to configure the following items:Item DescriptionWai

Configuring the Printer 277XPS SettingsThe Print - Default Settings - XPS Settings window allows you to configure the following items:Print to PS Erro

Configuring the Printer278" This page appears only if a hard disk kit or a CompactFlash card is installed.Item DescriptionDigital Signature Spec

Configuring the Printer 279Print Quality SettingsThe Print - Default Settings - Print Quality Settings window allows you to configure the following it

Configuring the Printer280Color Separation If On is selected, color separation is per-formed.If Off is selected, color separation is not per-formed.Ch

Configuring the Printer 281Edge Enhance-ment (Image/Text/Graphics Printing)Select whether image/text/graphics edges are emphasized.If On is selected,

SOFTWARE LICENSE AGREEMENTThis package contains the following materials provided by Konica Minolta Business Technolo-gies, Inc. (KMBT): software inclu

Printer Setup Utility Settings127 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Output Tray Unit and Duplex Unit

Configuring the Printer282Economy Print ModeSelect whether to print graphics with a reduced density by reducing the amount of toner that is used.When

Configuring the Printer 283Image/Text/Graphics Printing (Source)Specifies the color space for RGB data.Choices: Device Color, sRGBDefault: sRGBConfigu

Configuring the Printer284PS SettingsImage/Text/Graphics Printing (RGB Source)Specifies the color space for RGB data.Choices: Device Color, sRGB, Appl

Configuring the Printer 285Image/Text/Graphics Printing (Destination Pro-file)Specifies the ICC destination profile to be used for printed output.Choi

Configuring the Printer286Calibration SettingsTone Calibration If On is indicated, image adjustments are applied.If Off is indicated, image adjustment

Configuring the Printer 287Camera Direct SettingsClear button Resets all configuration settings to previous values.Item Description

Configuring the Printer288The Print - Default Settings - Camera Direct Settings allows you to config-ure the following items:Item DescriptionCamera Di

Configuring the Printer 289Contrast Specifies the contrast of the image.Choices: -15%, -10%, -5%, 0, +5%, +10%, +15%Default: 0Configuration Menu Equiv

Configuring the Printer290RGB Intent Specifies the characteristic applied when converting RGB image data to CMYK data.If Vivid is selected, a vivid ou

Configuring the Printer 291Download Font/Form" This page appears only if a hard disk kit or a CompactFlash card is installed.PS Font" The

Printer Setup Utility Settings 13AppleTalk Setting1 Connect the printer to an Ethernet network.2 Open Printer Setup Utility, which can be accessed by

Configuring the Printer292Form OverlayThe Print - Download Font/Form - Form Overlay window allows you to configure the following items:Delete button D

Configuring the Printer 293Color ProfileThe Print - Download Font/Form - Color Profile window allows you to con-figure the following items:Delete butt

Configuring the Printer294" When Download Manager is being used, long file names cannot be specified for downloaded form PostScript fonts, overl

Configuring the Printer 295Network PageThis page allows you to configure network settings. For more information on these protocols, see chapter 7, “Ne

Configuring the Printer296Speed Specifies the operating mode and speed for Ethernet.Choices: Auto, 10Base-T(Half), 10Base-T(Full), 100Base-TX(Half), 1

Configuring the Printer 297IPv4 SettingsThe Network - TCP/IP - IPv4 Settings window allows you to configure the following items. For more information

Configuring the Printer298IP Address* Sets the printer’s IP address.Range: 0–255 for each xxx tripletDefault: 0.0.0.0" If the specified IP addre

Configuring the Printer 299IPv6 SettingsThe Network - TCP/IP - IPv6 Settings window allows you to configure the following items. For more information

Configuring the Printer300IPv6 Link Local AddressDisplays IPv6 Link Local Address. Configuration Menu Equivalent: INTERFACE MENU - ETHERNET - TCP/IP -

Configuring the Printer 301RAW Port SettingsThe Network - TCP/IP - RAW Port Settings window allows you to configure the following items. For more info

Printer Setup Utility Settings144 Select BHC31P-xxxxxx in the Printer Name list." “xxxxxx” refers to the last six digits of the MAC address (in

Configuring the Printer302RAW Port BidirectionalSelect whether or not the RAW Port bidirectional is used. Choices: Enable, DisableDefault: DisableConf

Configuring the Printer 303DNS SettingsThe Network - TCP/IP - DNS Settings window allows you to configure the following items. For more information on

Configuring the Printer304Domain Name Automatic AcquisitionSelect whether or not the domain name automatic acquisition is used. Choices: Enable, Disab

Configuring the Printer 305IP Address FilteringThe Network - TCP/IP - IP Address Filtering page allows you to specify the IP address and limitations f

Configuring the Printer306Item DescriptionAccess Permis-sion AddressIf Enable is selected, the range of IP addresses permitted access to the printer c

Configuring the Printer 307Access Refuse AddressIf Enable is selected, the range of IP addresses refused access to the printer can be specified. A max

Configuring the Printer308IPsecThe Network - TCP/IP - IPsec window allows you to configure the following items. For more information on these TCP/IP,

Configuring the Printer 309IPsec (General Settings)The Network - IPsec - General Settings window allows you to configure the following items. IKE Sett

Configuring the Printer310IKE Life Time Specifies the IKE Life Time (in seconds). Range: 80-604800 Default: 28800IKE Diffie-Hell-man GroupSelects IKE

Configuring the Printer 311IPsec (IKE Settings) The Network - IPsec - IKE Settings window allows you to configure the fol-lowing items. Item Descripti

Printer Setup Utility Settings 15IP Printing Setting1 Connect the printer to an Ethernet network.2 Open Printer Setup Utility, which can be accessed b

Configuring the Printer312IPsec (IPsec SA Settings)The Network - IPsec - IPsec SA Settings window allows you to configure the following items.Cancel b

Configuring the Printer 313Encryption Algo-rithm for ESPWhen ESP is selected for Security Protocol, specify the ESP encryption algorithm.Choices: None

Configuring the Printer314IPsec (IPsec Peer Settings)The Network - IPsec - IPsec Peer Settings window allows you to configure the following items.Item

Configuring the Printer 315BonjourThe Network - Bonjour page allows you to configure the following items.Encapsulation ModeSpecify the operation mode

Configuring the Printer316Bonjour Name Specify the Bonjour name for the printer.Range: Up to 63 charactersDefault: KONICA MINOLTA bizhub C31P(xx:xx:xx

Configuring the Printer 317WSDThe Network - WSD window allows you to configure the following items:Item DescriptionWSD Print Select whether to enable

Configuring the Printer318Device Name Displays the Device name.Default: KONICA MINOLTA bizhub C31P(xx:xx:xx) " Specify the settings from the Sys

Configuring the Printer 319NetWareNetWareThe Network - NetWare - NetWare window allows you to configure the fol-lowing itemsItem DescriptionNetWare Ne

Configuring the Printer320Frame Type Specifies the Frame Type.Choices: Auto, Ethernet 802.2, Ethernet 802.3, Ethernet II, Ethernet SNAPDefault: AutoMo

Configuring the Printer 321Preferred NDS Context NameSets the Preferred NDS Context for the printer.Range: Up to 191 charactersDefault: [Blank]Preferr

Printer Setup Utility Settings165 Select desired print protocol from the Protocol pop-up menu." - For an IPP setup, select Internet Printing Pro

Configuring the Printer322NetWare StatusThe Network - NetWare - NetWare Status window allows you to configure the following items:Item DescriptionFile

Configuring the Printer 323IPPThe Network - IPP window allows you to configure the following items. For details on IPP, refer to chapter 7, “Network

Configuring the Printer324Accept IPP Job Sets whether or not to accept IPP Job.Choices: Enable, DisableDefault: EnablePrinter Name Displays the printe

Configuring the Printer 325Operational SupportPrint Job If this check box is selected, Print Job is enabled.Default: CheckedValidate Job If this check

Configuring the Printer326Apply button Applies the configuration settings for this window.Clear button Resets all configuration settings to previous v

Configuring the Printer 327FTPServerThe Network - FTP - Server window allows you to configure the following items:Item DescriptionFTP Server Enables o

Configuring the Printer328SNMPThe Network - SNMP window allows you to configure the following items:Item DescriptionSNMP SNMP If Enable is selected, S

Configuring the Printer 329SNMP v3(IP)If Enable is selected, SNMP v3(IP) is enabled.Choices: Enable, DisableDefault: EnableSNMP v1(IPX)If Enable is se

Configuring the Printer330Read Security LevelSpecifies the security level for read only user.Choices: None, Auth-password, Auth-password/Priv-password

Configuring the Printer 331Trap Set-tingsAllow Set-tingSpecifies whether or not to permit the Trap settingsChoices: Allow, RestrictDefault: AllowTrap

Printer Setup Utility Settings 176 Enter the IP address for the printer in the Address text box." - For an LPD setup, “lp” in the Queue text box

Configuring the Printer332AppleTalkThe Network - AppleTalk window allows you to configure the following items:Item DescriptionAppleTalk If Enable is s

Configuring the Printer 333EmailSend EmailThe Network - Email - Send Email window allows you to configure the fol-lowing items:Clear button Resets all

Configuring the Printer334Port Num-berSpecifies the port number of the mail transmission server.Range: 1 - 65535Default: 25Connec-tion Time-outSpecifi

Configuring the Printer 335SSL/TLSSSL/TLS InformationThe Network - SSL/TLS - SSL/TLS Information page allows you to specify SSL/TLS settings." A

Configuring the Printer336SSL/TLS Setting (When a certificate is not installed)The Network - SSL/TLS - SSL/TLS Setting page allows you to select the f

Configuring the Printer 337SSL/TLS Setting (When a certificate is installed)The Network - SSL/TLS - SSL/TLS Setting page allows you to select the fol-

Configuring the Printer338Self-signed Certificate SettingThe Network - SSL/TLS - Self-signed Certificate Setting page allows you to create a certifica

Configuring the Printer 339Locality Specify the name of the municipality.Range: Up to 127 charactersDefault: [Blank]State/Province Specify the name of

Configuring the Printer340Request a certificateThe Network - SSL/TLS - Request a Certificate page allows you to config-ure the following items:Item De

Configuring the Printer 341Locality Specifies the name of the municipality.Range: Up to 127 charactersDefault: [Blank]State/Province Specifies the nam

Printer Setup Utility Settings189 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Output Tray Unit and Duplex Unit

Configuring the Printer342Certificate RequestThe Network - SSL/TLS - Certificate Request page displays the data that will be submitted to the certific

Configuring the Printer 343Install a CertificateThe Network - SSL/TLS - Install a Certificate page allows you to install the certificate issued by the

Configuring the Printer344Encryption Strength Setting" This menu item appears if a certificate is installed.The Network - SSL/TLS - Encryption S

Configuring the Printer 345Remove a Certificate" This menu item appears if a certificate is installed.The Network - SSL/TLS - Remove a Certifica

Configuring the Printer346Mode Using SSL/TLS" This menu item appears if a certificate is installed.The Network - SSL/TLS - Mode Using SSL/TLS pa

Configuring the Printer 347AuthenticationUser AuthenticationThe Network - Authentication - User Authentication page allows you to specify user authent

Configuring the Printer348Public Access Select whether or not logon as a Public user is per-mitted when authentication settings have been speci-fied.C

Configuring the Printer 349Auto LogoutNetwork - Authentication - Auto Logout window allows you to configure the following items.Item DescriptionAdmin.

Configuring the Printer350IEEE802.1xThe Network - Authentication - IEEE802.1x window allows you to configure the following items:Item DescriptionIEEE8

Configuring the Printer 351User ID Specifies the account name, when EAP Type is set to EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, LEAP or Server Specification.

Printer Settings (Mac OS X 10.5) 19Printer Settings (Mac OS X 10.5)When Using a USB Connection1 Use a USB cable to connect the printer to your compute

Configuring the Printer352Client Certificate Shows whether or not a client certificate has been specified." Specify the settings from the Networ

Configuring the Printer 353CA CertificateCA Certificate InformationThe Network - Authentication - CA Certificate - CA Certificate Informa-tion window

Configuring the Printer354CA Certificate Setting (When a certificate is installed)The Network - Authentication - CA Certificate - CA Certificate Setti

Configuring the Printer 355CA Certificate Setting (When a certificate is not installed)The Network - Authentication - CA Certificate - CA Certificate

Configuring the Printer356Install a CertificateThe Network - Authentication - CA Certificate - Install a Certificate page allows you to install the ce

Configuring the Printer 357Remove a CertificateThe Network - Authentication - CA Certificate - Remove a Certificate page allows you to delete the inst

Configuring the Printer358

IndexIndex359AAccount Mode 179Account Mode, PageScope Web Connection 179Active job list, PageScope Web ConnectionPrint job status 197Admin Password 24

Index360ConfigurationNetwork settings 130, 295Printer, via PageScope Web Connection 220Configuration, PageScope Web Connection 220AppleTalk 332Camera

Index361IIEEE802.1x 153IEEE802.1x, PageScope Web Connection 350IKE Settings, PageScope Web Connection 311Install a certificate, PageScope Web Connecti

Printer Settings (Mac OS X 10.5)20The detected printer appears in the Printer Browser.5 Select KONICA MINOLTA bizhub C31P in the Printer Name list.&q

Index362PPage setup settings 38Custom paper size options 40Page attributes options 39PageScope Web Connection 172Account Track Registration 181Active

Index363Password, PageScope Web Connection 246PCL font, PageScope Web Connection 214PCL settings, PageScope Web Connection 206, 274Port 9100 155Print

Index364Device information 248Password 246Reset printer 253ROM version 251Status notification settings 254Time adjustment settings 244TTCP/IP, PageSco

Printer Settings (Mac OS X 10.5) 216 Check that KONICA MINOLTA bizhub C31P PPD is selected in the Printer Using list.7 Click Add and then, click Confi

11. Notice to Government End Users: The Software is a “commercial item,” as that term is defined at 48 C.F.R.2.101, consisting of “commercial computer

Printer Settings (Mac OS X 10.5)228 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Output Tray Unit and Duplex Uni

Printer Settings (Mac OS X 10.5) 23When Using a Network ConnectionThe network connection settings can be specified in one of three ways: Bon-jour Sett

Printer Settings (Mac OS X 10.5)24The detected printer appears in the Printer Browser.5 Select KONICA MINOLTA bizhub C31P(xx:xx:xx) in the Printer Nam

Printer Settings (Mac OS X 10.5) 256 Check that KONICA MINOLTA bizhub C31P PPD is selected in the Print Using list.7 Click Add.The new printer appears

Printer Settings (Mac OS X 10.5)26AppleTalk Setting1 Connect the printer to an Ethernet network.2 Select System Preference from the Apple menu.3 Click

Printer Settings (Mac OS X 10.5) 27The detected printer appears in the Printer Browser.5 Select BHC31P-xxxxxx in the Printer Name list." “xxxxxx

Printer Settings (Mac OS X 10.5)286 Check that KONICA MINOLTA bizhub C31P PPD is selected in the Print Using list.7 Click Add.The new printer appears

Printer Settings (Mac OS X 10.5) 29IP Printing Setting1 Connect the printer to an Ethernet network.2 Select System Preference from the Apple menu.3 Cl

Printer Settings (Mac OS X 10.5)306 Select desired print protocol from the Protocol pop-up menu." - For an IPP setup, select Internet Printing P

Printer Settings (Mac OS X 10.5) 317 Enter the IP address for the printer in the Address text box." - For an LPD setup, “lp” in the Queue text b

4. DISCLAIMER OF WARRANTY Adobe licenses the Software to you on an “AS IS” basis. Adobe makes no representation as to the adequacy of the Software for

Printer Settings (Mac OS X 10.5)3210 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Output Tray Unit and Duplex Un

Printer Settings (Mac OS X 10.5) 3311 Click Continue.The new printer appears in the Printer List screen.

Selecting Print Options34Selecting Print OptionsFor Mac OS X 10.2/10.3/10.41 Open Printer Setup Utility (Print Center), which can be accessed by click

Selecting Print Options 354 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Output Tray Unit and Duplex Unit accord

Selecting Print Options36For Mac OS X 10.51 Select System Preference from the Apple menu.2 Click Print & Fax.3 Select this printer in the Printer

Selecting Print Options 375 Select the appropriate settings in the Printer Memory, Storage, Paper Source Unit, Output Tray Unit and Duplex Unit accord

Specifying Page Setup Settings38Specifying Page Setup SettingsThe following dialog box appears when Page Setup... is selected from the File menu in th

Specifying Page Setup Settings 39Page Attributes OptionsThe Page Attributes section is used to specify the settings for the paper size, scaling, and p

Specifying Page Setup Settings40Custom Paper Size OptionsYou can also specify a paper size that is not listed in the Paper Size pop-up menu.1 Select M

Specifying Print Settings (Mac OS X 10.4) 41Specifying Print Settings (Mac OS X 10.4)The following dialog box appears when Print... is selected from t

9. GOVERNING LAW This Agreement will be governed by and construed in accordance with the substantive laws in force in the State of California as such

Specifying Print Settings (Mac OS X 10.4)42Print Dialog BoxSection DescriptionCopies & Pages This section contains options for the number of copie

Specifying Print Settings (Mac OS X 10.4) 43" No warning message will be displayed if options cannot be used together are selected.Common button

Specifying Print Settings (Mac OS X 10.4)44Copies & PagesThe Copies & Pages section is used to specify the number of copies to print and the r

Specifying Print Settings (Mac OS X 10.4) 45LayoutThe Layout section is used to specify the page layout when printing and the setting for double-sided

Specifying Print Settings (Mac OS X 10.4)46" To print on both sides of the paper, Duplex Unit must be selected under Options & Supplies (p.

Specifying Print Settings (Mac OS X 10.4) 47Paper HandlingThe Paper Handling section is used to specify the pages that are to be printed and the order

Specifying Print Settings (Mac OS X 10.4)48ColorSync Color ConversionAllows you to select host-based color matching or printer-based color matching.

Specifying Print Settings (Mac OS X 10.4) 49Error Handling PostScript ErrorsAllows you to select whether or not a report is outputted when a Post-Scr

Specifying Print Settings (Mac OS X 10.4)50Paper FeedThe Paper Feed section is used to specify the paper feed setting. All pages fromAll pages in the

Specifying Print Settings (Mac OS X 10.4) 51Color Options Quick ColorAllows you to select a color preset. BrightnessAllows you to set Brightness. C

5. All company names and product names used in this document is the trademarks or regis-tered trademarks of their respective holder.This ICC Profile m

Specifying Print Settings (Mac OS X 10.4)52Advanced Color Options/Image RGB SourceAllows you to select RGB color profiles for images. RGB IntentAllo

Specifying Print Settings (Mac OS X 10.4) 53 Download ManagerClick this button to start up the installed Download Manager." In order to start u

Specifying Print Settings (Mac OS X 10.4)54 Edge EnhancementAllows you to select Edge Enhancement for text. Hide Advanced OptionsClick this button t

Specifying Print Settings (Mac OS X 10.4) 55 RGB IntentAllows you to select color intent for RGB graphics. RGB Gray TreatmentAllows you to select RG

Specifying Print Settings (Mac OS X 10.4)56Advanced Color Options/Simulation Simulation ProfilesAllows you to select color profiles for simulation.

Specifying Print Settings (Mac OS X 10.4) 57" In order to start up Download Manager from the Advanced Color Options pane, Download Manager must

Specifying Print Settings (Mac OS X 10.4)58Basic 2 CollateSelect whether or not to use the collate function." If the staple finisher is install

Specifying Print Settings (Mac OS X 10.4) 59Supply LevelsThe Supply Levels section provides information for checking the amount of service life remain

Specifying Print Settings (Mac OS X 10.4)60SummaryThe Summary is used to check the currently selected print settings.

Specifying Print Settings (Mac OS X 10.5) 61Specifying Print Settings (Mac OS X 10.5)The following dialog box appears when Print... is selected from t

This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson (tjh@cryp

Specifying Print Settings (Mac OS X 10.5)62" No warning message will be displayed if options cannot be used together are selected.Common buttons

Specifying Print Settings (Mac OS X 10.5) 63" In order to use the collate function, the optional hard disk kit or a Com-pactFlash card of 1 GB o

Specifying Print Settings (Mac OS X 10.5)64LayoutThe Layout section is used to specify the page layout when printing and the setting for double-sided

Specifying Print Settings (Mac OS X 10.5) 65 Reverse Page OrientationThe printing direction is inverted vertically.Color Matching Color MatchingColo

Specifying Print Settings (Mac OS X 10.5)66 Pages To PrintAll pages: Select this option to print all pages.Odd Only: Select this option to print only

Specifying Print Settings (Mac OS X 10.5) 67 First page fromThe first page of the document is printed on paper from a paper tray differ-ent from the

Specifying Print Settings (Mac OS X 10.5)68SchedulerThe Scheduler section is used to specify the timing and priority for printing jobs. Print Documen

Specifying Print Settings (Mac OS X 10.5) 69Color Options Quick ColorAllows you to select a color preset. BrightnessAllows you to set Brightness. C

Specifying Print Settings (Mac OS X 10.5)70Advanced Color Options/Image RGB SourceAllows you to select RGB color profiles for images. RGB IntentAllo

Specifying Print Settings (Mac OS X 10.5) 71Advanced Color Options/Text RGB SourceAllows you to select RGB color profiles for text. RGB IntentAllows

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHA

Specifying Print Settings (Mac OS X 10.5)72Advanced Color Options/Graphics RGB SourceAllows you to select RGB color profiles for graphics. RGB Inten

Specifying Print Settings (Mac OS X 10.5) 73Advanced Color Options/Simulation Simulation ProfilesAllows you to select color profiles for simulation.

Specifying Print Settings (Mac OS X 10.5)74Printer FeaturesBasic 1 Nearest Size and ScaleIf no paper tray contains paper of the specified size, the p

Specifying Print Settings (Mac OS X 10.5) 75Basic 2 CollateSelect whether or not to use the collate function." If the staple finisher is instal

Specifying Print Settings (Mac OS X 10.5)76Supply LevelsThe Supply Levels section provides information for checking the amount of service life remaini

Specifying Print Settings (Mac OS X 10.5) 77SummaryThe Summary is used to check the currently selected print settings.

Troubleshooting78TroubleshootingSymptom SolutionThe setting in the saved presets are not applied.Depending on the functions selected for the printer,

Troubleshooting 79The specified name can-not be used for the name of a custom paper size.Due to the limitations of Mac OS X, the follow-ing names cann

Troubleshooting80

Operation onthe XPS Driverfor Windows